T-Con is especially for Timber-Concrete-Composite applications.
1 | Head geometry
- Better force transmission with hex drive possible – important for espacially hard wood used for the refurbishment of old buildings
- The commercially available time-consuming tool change
2 | Friction part and screw-in marker
The friction part serves as a handy marker for the residual length which has to protrude from the wood.
3 | Thread
- Quicker install
- Minimized blast effect
- Lower torque during fastening
4 | Tip
With patented follower thread, rolled out to the tip. 35° tip for fast bite especially with 45° tilt.
| Available sizes
Rapid® T-Con are available as 8 x 155 and 8 x 205 mm.