Sherpa XS – M Series

Connectors for timber engineering, roof and wall components

Sherpa Connectors
Sherpa Connectors

The mature and tested SHERPA connector technology permits efficient & competitive planning and execution of demanding tasks throughout the construction industry.
From connections in timber engineering through roof and wall components to mixed- and specialty structures with steel and concrete, anything is possible.
The wide range of products facilitates the creation of a tailor-made, secure and efficient solution for any task.
The high level of prefabrication and the rapid assembly of these standardized connectors guarantee economic implementation of the most varied projects.

 alternative screw length may be used and result in different capacities
ModelDimensionsScrews/UnitMin. charakt. Capacity (GL24h)Pair/Box
XS5 ImageSherpa XS 512 × 30 × 50 mm
(≈ 1/2 × 1 1/8 × 2 in)
12 units 4.5x505 kN10
XS10 ImageSherpa XS 1012 × 30 × 70 mm
(≈ 1/2 × 1 1/8 × 2 3/4 in)
18 units 4.5x5010 kN10
XS15 ImageSherpa XS 1512 × 30 × 90 mm
(≈ 1/2 x 1 1/8 x 3 1/2 in)
21 units 4.5x5015 kN10
S20 ImageSherpa XS 2012 × 30 × 110 mm
(≈ 1/2 x 1 1/8 x 4 3/8 in)
25 units 4.5x5020 kN10
S5 ImageSherpa S 512 × 40 × 50 mm
(≈ 1/2 x 1 1/2 x 2 in)
12 units 4.5x505 kN10
S10 ImageSherpa S 1012 × 40 × 70 mm
(≈ 1/2 x 1 1/2 x 2 3/4 in)
18 units 4.5x5010 kN10
S15 ImageSherpa S 1512 × 40 × 90 mm
(≈ 1/2 x 1 1/2 x 3 1/2 in)
21 units 4.5x5015 kN10
S20 ImageSherpa S 2012 × 40 × 110 mm
(≈ 1/2 x 1 1/2 x 4 3/8 in)
25 units 4.5x5020 kN10
M15 ImageSherpa M 1514 × 60 × 90 mm
(≈ 9/16 x 2 3/8 x 3 1/2 in)
16 units 6.5x6515 kN10
M20 ImageSherpa M 2014 × 60 × 110 mm
(≈ 9/16 x 2 3/8 x 4 3/8 in)
20 units 6.5x6520 kN10
M25 ImageSherpa M 2514 × 60 × 130 mm
(≈ 9/16 x 2 3/8 x 5 1/8 in)
23 units 6.5x6525 kN10
M30 ImageSherpa M 3014 × 60 × 150 mm
(≈ 9/16 x 2 3/8 x 5 7/8 in)
26 units 6.5x6530 kN10
M40 ImageSherpa M 4014 × 60 × 170 mm
(≈ 9/16 x 2 3/8 x 6 3/4 in)
30 units 6.5x6540 kN10

Contact us