Tie In Timber
  • 604 842 1241
  • info@tiein-timber.ca
  • Home
  • Our products
  • Sherpa Connectors
    • Sherpa XS – M Series
    • Sherpa L – XXL Series
    • Sherpa Power Base
    • Sherpa CS Series
    • Assembly Series
    • Sherpa CLT Connector
    • Sherpa Fire Stop 2.5
    • Sherpa Regufoam
  • Schmid Screws
    • RAPID® Secure
    • RAPID® 2000
    • RAPID® Komprex
    • RAPID® Fullthread
    • RAPID® SuperSenkFix
    • RAPID® Dual
    • RAPID® T-Lift
    • RAPID® T-Con
    • RAPID® Hardwood
    • RAPID® Top-2-Roof
  • About
  • Media

Home » Products » Sherpa XS – M Series

Sherpa XS – M Series

Connectors for timber engineering, roof and wall components

Sherpa Connectors
Sherpa Connectors

The mature and tested SHERPA connector technology permits efficient & competitive planning and execution of demanding tasks throughout the construction industry.
From connections in timber engineering through roof and wall components to mixed- and specialty structures with steel and concrete, anything is possible.
The wide range of products facilitates the creation of a tailor-made, secure and efficient solution for any task.
The high level of prefabrication and the rapid assembly of these standardized connectors guarantee economic implementation of the most varied projects.

Assembly-Instruction-Timber PDF
 alternative screw length may be used and result in different capacities
ModelDimensionsScrews/UnitMin. charakt. Capacity (GL24h)Pair/Box
XS5 ImageSherpa XS 512 × 30 × 50 mm
(≈ 1/2 × 1 1/8 × 2 in)
12 units 4.5x505 kN10
XS10 ImageSherpa XS 1012 × 30 × 70 mm
(≈ 1/2 × 1 1/8 × 2 3/4 in)
18 units 4.5x5010 kN10
XS15 ImageSherpa XS 1512 × 30 × 90 mm
(≈ 1/2 x 1 1/8 x 3 1/2 in)
21 units 4.5x5015 kN10
S20 ImageSherpa XS 2012 × 30 × 110 mm
(≈ 1/2 x 1 1/8 x 4 3/8 in)
25 units 4.5x5020 kN10
S5 ImageSherpa S 512 × 40 × 50 mm
(≈ 1/2 x 1 1/2 x 2 in)
12 units 4.5x505 kN10
S10 ImageSherpa S 1012 × 40 × 70 mm
(≈ 1/2 x 1 1/2 x 2 3/4 in)
18 units 4.5x5010 kN10
S15 ImageSherpa S 1512 × 40 × 90 mm
(≈ 1/2 x 1 1/2 x 3 1/2 in)
21 units 4.5x5015 kN10
S20 ImageSherpa S 2012 × 40 × 110 mm
(≈ 1/2 x 1 1/2 x 4 3/8 in)
25 units 4.5x5020 kN10
M15 ImageSherpa M 1514 × 60 × 90 mm
(≈ 9/16 x 2 3/8 x 3 1/2 in)
16 units 6.5x6515 kN10
M20 ImageSherpa M 2014 × 60 × 110 mm
(≈ 9/16 x 2 3/8 x 4 3/8 in)
20 units 6.5x6520 kN10
M25 ImageSherpa M 2514 × 60 × 130 mm
(≈ 9/16 x 2 3/8 x 5 1/8 in)
23 units 6.5x6525 kN10
M30 ImageSherpa M 3014 × 60 × 150 mm
(≈ 9/16 x 2 3/8 x 5 7/8 in)
26 units 6.5x6530 kN10
M40 ImageSherpa M 4014 × 60 × 170 mm
(≈ 9/16 x 2 3/8 x 6 3/4 in)
30 units 6.5x6540 kN10

Contact us

  • Contact
  • Privacy
x

Sherpa M 30

M30 Image
M30 Connector

  • Lock Screw 4x20
    Lock Screw 4×20
  • Sherpa Screw 6.5x65 Zink_Nickel
    Sherpa Screw 6.5×65 Zink_Nickel
  • Sherpa Screw 6.5x65
    Sherpa Screw 6.5×65
  • Sherpa Connection
    Sherpa Connection
  • Sherpa Insert
Screws for Sherpa M Series

The wide range of products facilitates the creation of a tailor-made, secure and efficient solution for any task. The XS – M series, for example, is ideally suited for winter gardens, carports and smaller wooden structures

Dimensions: 60 x 150 mm (≈ 2 3/8 x 5 7/8 in)
Thickness: 14 mm (≈ 9/16 in)

Minimum cross-section:
Main beam: 65 x 180 mm (≈ 2 9/16 x 7 1/8 in),
Secondary beam: 80 x 180 mm (≈ 3 1/8 x 7 1/8 in)
(minimum cross-sections apply if the upper edge of the main and secondary beams are mounted flush)

Screws:

Sherpa special screws: 26 units 6.5 x 65 mm
(alternative screw length: 6.5 x 85 mm, 6.5 x 105 mm)

Lock screws: 1 unit 4 x 20/12

Characteristic carrying capacity: 30 – 58 kN
(For structural calculations, the characteristic values ​​of the respective ETA must be taken into account and depend on the quality of the wood and the screw length used)

The benefits are:

  • Safety provided by certification and monitoring
  • Simple and fast calculation
  • High degree of prefabrication
  • Quick installation

10 pair/package